Cisco Catalyst 2950 Software Configuration Manual page 396

Hide thumbs Also See for Catalyst 2950:
Table of Contents

Advertisement

Understanding IGMP Snooping
Router A sends a general query to the switch, which forwards the query to ports 2 through 5, all members
of the same VLAN. Host 1 wants to join multicast group 224.1.2.3 and multicasts an IGMP membership
report (IGMP join message) to the group with the equivalent MAC destination address of
0x0100.5E01.0203. When the CPU receives the IGMP report multicast by Host 1, the CPU uses the
information in the IGMP report to set up a forwarding-table entry, as shown in
the port numbers of Host 1, the router, and the switch internal CPU.
Table 20-1
Destination Address
0100.5exx.xxxx
0100.5e01.0203
Note that the switch hardware can distinguish IGMP information packets from other packets for the
multicast group.
The first entry in the table tells the switching engine to send IGMP packets to only the switch CPU.
This prevents the CPU from becoming overloaded with multicast frames.
The second entry tells the switching engine to send frames addressed to the 0x0100.5E01.0203
multicast MAC address that are not IGMP packets (!IGMP) to the router and to the host that has
joined the group.
If another host (for example, Host 4) sends an unsolicited IGMP join message for the same group
(Figure
as shown in
the message is not flooded to other ports on the switch. Any known multicast traffic is forwarded to the
group and not to the CPU. Any unknown multicast traffic is flooded to the VLAN and sent to the CPU
until it becomes known.
Figure 20-2
Forwarding
Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide
20-4
IGMP Snooping Forwarding Table
Type of Packet
IGMP
!IGMP
20-2), the CPU receives that message and adds the port number of Host 4 to the forwarding table
Table
20-2. Note that because the forwarding table directs IGMP messages to only the CPU,
Second Host Joining a Multicast Group
Router A
1
PFC
CPU
0
table
2
3
Host 1
Host 2
Ports
0
1, 2
VLAN
4
5
Host 3
Host 4
Chapter 20
Configuring IGMP Snooping and MVR
Table
20-1, that includes
78-11380-12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Catalyst 2955

Table of Contents