MODBUS PROTOCOL
3 Series supported functions
6-4
The following functions are supported by the 3 Series relay :
•
FUNCTION CODE 03H - Read Setpoints
•
FUNCTION CODE 04H - Read Actual Values
•
FUNCTION CODE 05H - Execute Operation
•
FUNCTION CODE 06H - Store Single Setpoint
•
FUNCTION CODE 07H - Read Device Status
•
FUNCTION CODE 08H - Loopback Test
•
FUNCTION CODE 10H - Store Multiple Setpoints
Refer to section 6 of this guide for more details on MODBUS function codes.
SR3 SERIES PROTECTIVE RELAY PLATFORM – COMMUNICATIONS GUIDE
CHAPTER 6: USB INTERFACE