Cisco ASR 5000 series Installation And Administration Manual page 79

Chassis Installation
Step a
on the sides of the bezel and pulling it toward you. Place it to the side for re-installation later.
Step b
Step c
out of the chassis. Place it to the side for re-installation later.
weight from its front and back as you slide it completely out of the chassis. Vorsicht beim Herausziehen der
Luefter-Schublade: um eine Beschaedigung des Moduls und eventuelle Verletzungen zu vermeiden, sollte
diese hinten und vorne unterstuetzt werden.
Step 2
Remove the lower fan tray assembly.
OL-24878-01
Remove the plastic bezel from the upper-front of the chassis by placing your fingers in the notches
Loosen the four screws that secure the fan tray in place using a #1 Phillips screwdriver.
Grasp the two bezel mounts on the front of the fan tray and pull. The fan tray should easily slide
W :
ARNING
To avoid personal injury and/or damage to the fan tray, be sure to support the fan tray's
Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide ▄
Installing the Chassis ▀