10 Gigabit Ethernet Line Card - Cisco ASR 5000 series Installation And Administration Manual

▀ ASR 5000 Line Cards
Figure 18.
2
3
L in k
A c t iv it y
S F P
L in k
A c t iv it y
4
S F P
L in k
A c t iv it y
S F P
L in k
A c t iv it y
S F P
E t h e r n e t
1 0 0 0
S X
Table 15. Quad Gigabit Line Card (QGLC) Callout Definitions
Number Description
1
Card Ejector Levers—Use to insert/remove card to/from chassis.
2
Interlock Switch—When pulled downward, the interlock switch notifies system to safely power down card prior
to removal.
3
Card Level Status LEDs—Show the status of the card. (See Applying Power and Verifying Installation for definitions)
4
Gigabit Ethernet Interface(s)—Gigabit Ethernet (GE) SFP modules.
1000Base-SX, 1000Base-LX, and 1000Base-T interfaces are supported depending on the SFP module installed.

10 Gigabit Ethernet Line Card

The 10 Gigabit Ethernet Line Card is commonly referred to as the XGLC. The XGLC supports higher speed
connections to packet core equipment, increases effective throughput between the ASR 5000 and the packet core
network, and reduces the number of physical ports needed on the ASR 5000.
▄ Cisco ASR 5000 Series Aggregation Services Router Installation and Administration Guide
Quad Gigabit Line Card (QGLC)
1
ASR 5000 Hardware Platform Overview
OL-24878-01