NEC UNIVERGE SV8100 Features & Specifications Manual page 597

UNIVERGE SV8100
Program
Number
11-14-15
11-14-16
11-14-17
11-14-18
15-03-01
15-03-04
20-06-01
20-13-11
20-13-13
20-13-16
Hotel/Motel
Program Name
Service Code Setup (for Hotel) –
Room Status Change for Other
Extension
Service Code Setup (for Hotel) –
Room Status Output
Service Code Setup (for Hotel) –
Hotel Room Monitor
Service Code Setup (for Hotel) –
Set Hotel PMS Code Restriction
Single Line Telephone Basic
Data Setup – SLT Signaling Type
Single Line Telephone Basic
Data Setup – Flashing
Class of Service for Extensions
Class of Service Options
(Supplementary Service) – Room
Monitor, Initiating Extension
Class of Service Options
(Supplementary Service) –
Continued Dialing (DTMF) Signal
on ICM Call
Class of Service Options
(Supplementary Service) –
Barge-In, Receive
Description/Comments
Customize the room status
change for other extension
Service Codes which are used
with the Hotel/Motel feature
(CD-CP00 must be licensed for
Hotel/Motel).
Customize the room status output
Service Codes used with the
Hotel/Motel feature (CD-CP00
must be licensed for Hotel/Motel).
Customize the hotel room monitor
Service Codes used with the
Hotel/Motel feature (CD-CP00
must be licensed for Hotel/Motel).
Customize the set hotel PMS code
restriction Service Codes used
with the Hotel/Motel feature
(CD-CP00 must be licensed for
Hotel/Motel).
Determine the dialing type the
connected telephone uses.
Enable/Disable Flash for single
line (500/2500 type) telephones.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension user
ability to Room Monitor other
extensions.
Turn Off or On an extension user
ability to use Continued Dialing,
which allows DTMF signal sending
while talking on extension.
Turn Off or On Barge-In at the
receiving extension (i.e., Barge-In
receive).
Issue 5.0
Assigned Data
MLT, SLT
(default = 741)
MLT
(default = 742)
MLT, SLT
(default = 770)
MLT
(default = 766)
0 = DP
1 = DTMF
(default = 1)
0 = No
1 = Yes
(default = 1)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension ports =
Class 1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
1 - 587