NEC UNIVERGE SV8100 Features & Specifications Manual page 426

Issue 5.0
Program
Number
20-14-05
20-14-06
20-14-07
20-14-08
20-14-09
20-14-10
20-14-11
21-15-01
22-01-11
1 - 416
Program Name
Class of Service Options for
DISA/E&M – Operator Calling
Class of Service Options for
DISA/E&M – Internal Paging
Class of Service Options for
DISA/E&M – External Paging
Class of Service Options for
DISA/E&M – Direct Trunk Access
Class of Service Options for
DISA/E&M – Forced Trunk
Disconnect <Not for ISDN
T-point>
Class of Service Options for
DISA/E&M – Call Forward Setting
by Remote via DISA
Class of Service Options for
DISA/E&M – DISA/Tie Trunk
Barge-In
Individual Trunk Group Routing
for Extensions
System Options for Incoming
Calls – VRS Waiting Message
Interval Time
Description/Comments
This option enables or disables a
DISA or tie trunk caller ability to
dial 0 for the telephone system
operator.
This option enables or disables a
DISA or tie trunk caller ability to
use the telephone system Internal
Paging.
This option enables or disables a
DISA or tie trunk caller ability to
use the telephone system External
Paging.
This option enables or disables a
DISA or tie trunk caller ability to
use Direct Trunk Access (Service
Code 805).
This option enables or disables a
tie trunk caller ability to use Forced
Trunk Disconnect (Service Code
3). This option is not available to
DISA callers.
Enable or disable a DISA caller
ability to use the Call Forward
service codes (Programs 11-11-01
~ 11-11-05).
In an extension Class of Service,
enable (1) or disable (0) a DISA or
tie trunk user from using the
Barge-In feature.
Designate the trunk route
accessed when a user dials the
Alternate Trunk Route Access
Code. Refer to Trunk Group
Routing to set up outbound
routing.
Setup the duration time between
announcing the VRS Waiting
Message for Auto – Attendant &
Queuing. The message is
repeatedly sent out in the
specified time.
Direct Inward System Access (DISA)
UNIVERGE SV8100
Assigned Data
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 =Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0~100
(0 = No Setting)
(default = 0)
0~64800 (seconds)
(default = 20 seconds)