NEC UNIVERGE SV8100 Features & Specifications Manual page 407

UNIVERGE SV8100
Program
Number
22-11-11
22-12-01
22-13-01
25-01-01
25-01-03
Direct Inward Dialing (DID)
Program Name
DID Translation Number
Conversion – Ring Group
Transfer
DID Intercept Ring Group
DID Trunk Group to Translation
Table Assignment
VRS/DISA Line Basic Data Setup
– VRS/DISA Dial-In Mode
VRS/DISA Line Basic Data Setup
– VRS/DISA Transfer Alarm
Description/Comments
Enable (1) or disable (0) each
conversion table to follow the Ring
Group programming defined in
Program 22-12-01 : DID Intercept
Ring Group. If Program 22-11-05 :
DID Translation Number
Conversion, Transfer Destination
Number 1 and Program 22-11-06 :
DID Translation Number
Conversion, Transfer Destination
Number 2 are set, the priority of
transferring is in this order:
Program 22-11-05 then Program
22-11-06 then if Program 22-11-11
is enabled, Program 22-12-01.
For each DID Translation Table,
program the DID Intercept
destination. The destination can
be a Ring Group, In-Skin/External
Voice Mail, or Centralized Voice
Mail. This program is used when
there is no destination
programmed in Program
22-11-05. It is unrelated to
Program 22-11-06 and Program
22-11-07.
Assign the DID trunk groups to
translation tables. If all the DID
trunks use the same type of DID
service, you may have only one
DID trunk group and one DID
Translation Table (with many
entries).
Determine whether the system
should use option 0 (Extension
number/Service code specify) or
option 1 (Use dial conversion
table) for calls.
Determine whether the system
should use option 0 (Normal) or
option 1 (Alarm) for calls.
Issue 5.0
Assigned Data
0 = Disable (Caller
hears Ringback)
1 = Enable (Go to
normal ring)
(default = 1)
0 (No Setting)
1~100 (Incoming Ring
Group)
102 (In-Skin/External
Voice Mail or InMail)
(default = 1)
0~20
(0 = No Setting)
(default = 1)
0 = Extension Number
Service Code Specify
(Intercom)
1 = Use Dial
Conversion Table
(default = 0)
0 = Normal
1 = Alarm
(default = 0)
1 - 397