NEC UNIVERGE SV8100 Features & Specifications Manual page 1066

Issue 5.0
Program
Number
44-05-05
44-05-06
44-05-07
44-05-08
44-05-09
44-05-10
44-05-11
44-06-01
1 - 1056
Program Name
ARS/F-Route Table – Gain Table
Number for Internal Calls
ARS/F-Route Table – Gain Table
Number for Tandem
Connections
ARS/F-Route Table – ARS Class
of Service
ARS/F-Route Table – Dial
Treatment
ARS/F-Route Table – Maximum
Digit
ARS/F-Route Table – CCIS over
IP Destination Point Code
ARS/F-Route Table – Network
Specified Parameter Table
Additional Dial Table
Description/Comments
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table
number to be used for internal
calls (0~500).
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the gain table
number to be used for the tandem
call (defined in Program 44-07).
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Class of Service
to be used for ARS (0~16). An
extensions ARS COS is
determined in Program 26-04-01.
For each ARS/F-Route table
(1~500) assign a priority number
(1~4). Select the Dial Treatment to
be used (0~15). The Dial
Treatments are determined in
Program 26-03-01.
Input the maximum number of
digits to send when using the
F-Route.
For each ARS/F-Route table
(1~500) assign the priority (1~4).
Set the CCIS over IP Destination
Point Code (0~24).
For each ARS/F-Route table
(1~500) assign the priority (1~4).
Assign the Network Specified
Parameter Table (0~16).
If an Additional Dial Number Table
is entered in Program 44-05-03,
define the additional dial table
(1~1000) to add digits in front of
the dialed ARS/F-Route number
*
(24 digits maximum 1-9, 0
Pause). To enter a wild card/don't
care digit, press Line Key 1 to
enter a P (pause) symbol.
Uniform Numbering Network
UNIVERGE SV8100
Assigned Data
0~500
0 = No Setting
(default = 0)
0~500
0 = No Setting
(default = 0)
0~16
(default = 0)
0~15
(default = 0)
0~24
(default = 0)
0~16367
(default = 0)
0~16
(default = 0)
Up to 24 digits
*
Enter: 1~9, 0, , #,
Pause (press line key 1
to enter a pause)
(default = Not
#
, assigned)