NEC UNIVERGE SV8100 Features & Specifications Manual page 1016

Issue 5.0
Program
Number
20-03-01
20-06-01
20-09-07
20-11-06
20-11-07
20-11-08
20-11-11
1 - 1006
Program Name
System Options for Single Line
Telephones – SLT Call Waiting
Answer Mode
Class of Service for Extensions
Class of Service Options
(Incoming Call Service) – Call
Queuing
Class of Service Options (Hold/
Transfer Service) – Unscreened
Transfer (Ring Inward Transfer)
Class of Service Options (Hold/
Transfer Service) – Transfer
Without Holding
Class of Service Options (Hold/
Transfer Service) – Transfer
Information Display
Class of Service Options (Hold/
Transfer Service) – Automatic
On-Hook Transfer
Description/Comments
For a busy single line (500/2500
type) telephones, set the mode
used to answer a camped-on trunk
call.
Modes:
0 = Press and release hookswitch
to pick up waiting call
1 = Press and release hookswitch
and dial Service Code 894 (Call
Waiting Answer/Split Answer for
SLT) to answer waiting call.
Assign a Class of Service (1~15)
to extensions.
Turn Off (0) or On (1) an extension
ability to have calls queued if a call
rings the extension when it is busy
Turns Off (0) or On (1) an
extension ability to use
Unscreened Transfer.
Turns Off or On an extension
ability to use Transfer Without
Holding.
In an extension Class of Service,
turn Off or On the incoming
Transfer preanswer display.
In an extension Class of Service,
turn On (1) or Off (0) the ability to
use Automatic On-Hook Transfer.
If enabled, user must press Hold
and dial the extension number to
Transfer the call. If disabled, a
user must have a Transfer
Programmable Function Key. To
transfer the call, the user would
press Hold, dial the extension
number, then press the Transfer
Programmable Function key to
complete the transfer.
UNIVERGE SV8100
Assigned Data
0 = Hookflash
(Hooking)
1 = Hookflash +
Service Code 894
(default = 0)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
All extension port =
Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for COS
01~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
Transfer