NEC UNIVERGE SV8100 Features & Specifications Manual page 1098

Issue 5.0
Program
Number
15-02-36
15-02-37
15-02-38
15-03-01
15-03-03
15-03-09
15-03-16
1 - 1088
Program Name
Multiline Telephone Basic Data
Setup – Message Waiting Lamp
Cycle for Called Extension
Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Color
Multiline Telephone Basic Data
Setup – Voice Mail Message Wait
Lamp Cycle
Single Line Telephone Basic
Data Setup – SLT Signaling Type
Single Line Telephone Basic
Data Setup – Terminal Type
Single Line Telephone Basic
Data Setup – Caller ID Function –
For External Module
Single Line Telephone Basic
Data Setup – Special DTMF
Protocol Send
Description/Comments
This option allows you to select
the Message Waiting flash pattern
for the station that receives the
Message Waiting reminder.
This option allows you to select
the Message Waiting flash pattern
for the station that set the
Message Waiting reminder.
This option allows you to select
the Message Waiting flash pattern
for the station that set the
Message Waiting reminder.
For each UNIVERGE SV8100
voice mail extension, this option
must be set to 0.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
This option must be set to 0 when
voice mail is used or the
integration code for the disconnect
function is incorrect.
Determine whether or not to send
the extension number of the
phone forwarded to the extension
when Program 15-03-04 is set to
Special (1) and not in the VM
group.
Voice Mail Integration (Analog)
UNIVERGE SV8100
Assigned Data
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
0 = Green
1 = Red
(default = 1)
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
(default = 3)
0 = DP
1 = DTMF
(default = 1)
0 = Normal
1 = Special
(default = 0)
0 = Disable
1 = Enable
(default = 0)
0 = No
1 = Yes
(default = 0)