NEC UNIVERGE SV8100 Features & Specifications Manual page 1073

UNIVERGE SV8100
Program
Number
11-07-01
15-03-01
15-03-03
16-01-01
16-01-02
16-01-03
16-01-04
UNIVERGE Multimedia Conference Bridge
Program Name
Department Group Pilot
Numbers – Dial
Single Line Telephone Basic
Data Setup – SLT Signaling Type
Single Line Telephone Basic
Data Setup – Terminal Type
Department Group Basic Data
Setup – Department Name
Department Group Basic Data
Setup – Department Calling
Cycle
Department Group Basic Data
Setup – Department Routing
When Busy (Auto Step Call)
Department Group Basic Data
Setup – Hunting Mode
Description/Comments
Assign a Department Group pilot
number for the CNF(8)-U ETU
(eight digits max). The extensions
are assigned to the group in
Program 16-02-01.
For each SLT extension, this
option must be set to 0.
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
Assign a name to the Extension
(Department) Groups.
Set the routing cycle for calls into
a department (i.e., when a user
dials the department pilot
number). The system can ring the
highest priority extension available
(Priority Routing, 0) or cycle in
circular order to a new idle
extension for each new call
(Circular Routing, 1).
Set how the system routes an
Intercom call to a busy
Department Group member. The
caller can hear busy tone (0) or
overflow to the first available
Department Group member (1).
This option is for Intercom calls to
an extension, not a pilot number.
Set if an unanswered call should
hunt once stopping at the last
member tried (0) or continually
hunt through the idle members (1).
Issue 5.0
Assigned Data
Up to eight digits
(default not assigned)
0 = DP
1 = DTMF
(default = 1)
0 = Normal
1 = Special
(default = 0)
Maximum 12
characters
(default not assigned)
0 = Normal Routing
(Priority)
1 = Easy – UCD
Routing (Circular)
(default = 0)
0 = Normal (Intercom
caller to busy
department member
hears busy)
1 = Circular (Intercom
callers to busy
department member
routes to idle member)
(default = 0)
0 = Last extension is
called and hunting is
stopped
1 = Circular
(default = 0)
1 - 1063