NEC UNIVERGE SV8100 Features & Specifications Manual page 1048

Issue 5.0
Related Features
IP Multiline Station (SIP)
Meet Me Paging
Meet Me Paging Transfer
Paging, External
Paging, Internal
Guide to Feature Programming
Program
Number
10-19-01
10-46-11
10-46-12
11-12-19
15-05-38
1 - 1038
Program Name
VoIP DSP Resource Selection
DT700 Server Information Setup
– Multicast IP Address
DT700 Server Information Setup
– Multicast Port
Service Code Setup (for Service
Access) – Internal Group Paging
IP Telephone Terminal Basic
Data Setup – Paging Protocol
Mode
Description/Comments
Select type of VoIP ETU DSP
Resource. This program setting
has no affect on the terminal/trunk
port assignment or usage.
Set the Multicast IP address so
that two or more main devices
don't overlap on the same
network, or if Multicast is used by
other IP services.
Sets the starting port number used
by Multicast.
Service code setup.
Sets the protocol mode for the
Paging function.
Unicast/Multicast Paging Mode
UNIVERGE SV8100
Assigned Data
0 = Common use for
both IP extensions and
trunks
1 = IP Extension
2 = SIP Trunk
3 = CCIS
4 = Use for NetLink
5 = Blocked
Default:
Resource 1 = 1
Resource 2~128 = 0
224.0.0.0~
239.255.255.255
(default = 224.0.0.10)
0~65535
(default = 30000)
MLT, SLT
(default = 801)
0 = Multicast
1 = Unicast
2 = Auto
(default = 0)