NEC UNIVERGE SV8100 Features & Specifications Manual page 1057

UNIVERGE SV8100
Program
Number
16-01-05
16-01-06
16-01-07
16-01-09
16-01-10
16-02-01
16-03-01
Uniform Call Distribution (UCD)
Program Name
Department Group Basic Data
Setup – Extension Group All
Ring Mode Operation
Department Group Basic Data
Setup – STG Withdraw Mode
Department Group Basic Data
Setup – Call Recall Restriction
for STG
Department Group Basic Data
Setup – Department Hunting No
Answer Time
Department Group Basic Data
Setup – Enhanced Hunt Type
Department Group Assignment
for Extensions
Secondary Department Group
Description/Comments
Set if all members of the group
should ring automatically (1) or
through the use of the service
code (0) defined in Program
11-12-09. Selecting automatic will
override the settings of Programs
16-01-03 and 16-01-04.
Use to set the STG withdraw
mode for each department group.
Determine whether or not an
unanswered call transferred to a
Department Group should recall
the extension from which it was
transferred.
Set how long a call rings a
Department Group extension
before hunting occurs.
Set the type of hunting for each
Department Group:
0 = No Queuing
1 = Hunting When Busy
2 = Hunting When Not Answered
3 = Hunting When Busy or No
Answer
Set up the Department Group
called by the pilot number and the
extension priority when a group is
called.
Call Pickup Groups are set up in
23-02.
Use this program to assign
extensions to multiple Department
Groups and set the priority
assignment. Each Secondary
Department Group can have up to
16 extensions assigned.
Issue 5.0
Assigned Data
0 = Manual
1 = Automatic
(default = 0)
0 = Disable (Camp On)
1 = Enable (Overflow
Mode)
(default = 0)
0 = Disable (Recall)
1 = Enable (No Recall)
(default = 0)
0-64800 (seconds)
(default = 15 seconds)
0 = No queuing
1 = Hunting When
Busy
2 = Hunting When Not
Answered
3 = Hunting When
Busy or No Answer
(default = 0)
Department Groups
1-64
Priority 1-512
Default = All
extensions in
Department Group 1
with priority in port
order:
Port 1 priority = 1
Port 512 priority = 512
Extension Number
Maximum eight digits
Priority Order
0~999
(default not assigned)
1 - 1047