Opening The Access Point Cover - Cisco Aironet 1130AG Series Hardware Installation Manual

Opening the Access Point Cover

Opening the Access Point Cover

The top cover provides access to the access point cable bay area containing the power connector,
Ethernet port, console serial port, the mode button, and the Ethernet and Radio LEDs.
Do not attempt to pry open or lift the top cover of the access point, because you could damage the cover.
Caution
Carefully read the instructions in this section before attempting to open the access point cover.
The cover is designed to partially open by sliding back from a secured position. Follow these steps to
open the top cover:
Locate the cable opening on the end of the unit (see
Step 1
Figure 2-5
1
Step 2 Place your thumb on the top cover (above the triangle mark
LED.
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
2-8
C I S C O C O N F I D E N T I A L -
Cable Opening in Access Point Housing
Top cover
Chapter 2
D r a f t 2
Figure 2-5).
2 Cable Opening
) and gently push towards the Status
Installing the Access Point
OL-6226-01