Troubleshooting; Checking The Access Point Leds - Cisco Aironet 1130AG Series Hardware Installation Manual

Checking the Access Point LEDs

Checking the Access Point LEDs
If your access point is not working properly, check the Status LED on the top panel or the Ethernet and
Radio LEDs in the cable bay area. You can use the LED indications to quickly assess the unit's status.
Figure 6-1
Figure 6-1
1
2
To view the Ethernet and Radio LEDs you must open the access point cover (refer to the
Note
Access Point Cover" section on page
When the access point cover is opened, the Status LED colors are not visible.
Note
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
6-2
C I S C O C O N F I D E N T I A L -
shows the access point LEDs.
Access Point LEDs
Status LED
Access point cover
D r a f t 2
3 Ethernet LED
4
Radio LED
2-8).
Chapter 6

Troubleshooting

"Opening the
OL-6226-01