Using The Web-Browser Interface; Using The Web-Browser Interface For The First Time; Using The Management Pages In The Web-Browser Interface - Cisco Aironet 1130AG Series Hardware Installation Manual

Using the Web-Browser Interface for the First Time

Using the Web-Browser Interface for the First Time
Use the access point's IP address to browse to the management system. See the
Assigning an IP Address" section on page 3-3
point.
Follow these steps to begin using the web-browser interface:
Step 1 Start your Internet browser.
Enter the access point's IP address in the browser Location field (Netscape Navigator) or Address field
Step 2
(Internet Explorer) and press Enter. An Enter Network Password screen appears.
Enter your username in the User Name field. The default username is Cisco.
Step 3
Enter the access point password in the Password field and press Enter. The default password is Cisco.
Step 4
The access point Summary Status page appears.

Using the Management Pages in the Web-Browser Interface

The system management pages use consistent techniques to present and save configuration information.
A navigation bar is on the left side of the page, and configuration action buttons appear at the bottom.
You use the navigation bar to browse to other management pages, and you use the configuration action
buttons to save or cancel changes to the configuration.
Changes are applied only when you click Apply. It's important to remember that clicking your browser's
Note
Back button returns you to the previous page without saving any changes you have made. Clicking
Cancel cancels any changes you made on the page and keeps you on that page.
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
4-2
C I S C O C O N F I D E N T I A L -
Chapter 4
D r a f t 2
for instructions on assigning an IP address to the access

Using the Web-Browser Interface

"Obtaining and
OL-6226-01