Show Lldp Entry - Cisco ASR 9000 Series Command Reference Manual

show lldp entry

show lldp entry

To display detailed information about LLDP neighbors, use the show lldp entry command in EXEC
configuration mode.
show lldp entry {* | name}
Syntax Description
*
name
Syntax Description
This command has no keywords or arguments.
Command Modes
EXEC (#)
Command History
Release
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Examples The following example shows sample output for all LLDP neighbor table entries on the system:
RP/0/RSP0/CPU0:router# show lldp entry *
Wed Apr 13 10:29:40.342 UTC
Capability codes:
------------------------------------------------
Local Interface: GigabitEthernet0/0/0/8
Chassis id: 0026.9815.c3e6
Port id: Gi0/0/0/8
Port Description: GigabitEthernet0/0/0/8
System Name: asr9k-5
System Description:
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
112
Displays detailed information about all LLDP neighbors.
Name of a specific LLDP neighbor for which detailed information is displayed.
(R) Router, (B) Bridge, (T) Telephone, (C) DOCSIS Cable Device
(W) WLAN Access Point, (P) Repeater, (S) Station, (O) Other
Ethernet Interface Commands on the Cisco ASR 9000 Series Router
Modification
This command was introduced.
Operation
read