SONET Controller Commands on the Cisco ASR 9000 Series Router
Examples
The following example enables authentication for APS group 1 in abctown:
RP/0/RSP0/CPU0:router(config)# aps group 1
RP/0/RSP0/CPU0:router(config-aps)# authenticate abctown
Related Commands
Command
aps group (global), on page 842
channel local, on page 849
channel remote, on page 851
show aps, on page 893
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Description
Adds an automatic protection switching (APS) group and enter APS
group configuration mode.
Assigns local SONET physical ports as SONET APS channels in the
current APS group.
Assigns a port and interface that is physically located in a remote router
as a SONET working or protect APS channel.
Displays the operational status for all configured SONET APS groups.
authenticate (PGP)
Release 5.3.x
847