Show Lacp Io - Cisco ASR 9000 Series Command Reference Manual

show lacp io

show lacp io
To display the Link Aggregation Control Protocol (LACP) transmission information that used by the
transmitting device for sending packets on an interface, use the show lacp io command in EXEC mode.
show lacp io {Bundle-Ether} bundle-id {GigabitEthernet| TenGigE} interface-path-id
Syntax Description
Bundle-Ether bundle-id
GigabitEthernet
TenGigE
interface-path-id
Command Default
The default takes no parameters and displays information for all actively transmitting interfaces.
Command Modes
EXEC mode
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command displays information only for interfaces that are actively transmitting packets.
Task ID
Task ID
bundle
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
650
Link Bundling Commands on the Cisco ASR 9000 Series Router
(Optional) Displays information for the Ethernet bundle interface with the
specified bundle-id. The range is 1 through 65535.
(Optional) Displays information for the Gigabit Ethernet interface with the
specified interface-path-id.
(Optional) Displays information for the Ten Gigabit Ethernet interface with the
specified interface-path-id.
Physical interface or virtual interface.
Use the show interfaces command to see a list of all interfaces
Note
currently configured on the router.
For more information about the syntax for the router, use the question mark (?)
online help function.
Modification
This command was introduced.
Operations
read