Channel Local - Cisco ASR 9000 Series Command Reference Manual

SONET Controller Commands on the Cisco ASR 9000 Series Router

channel local

To assign local SONET physical ports as SONET automatic protection switching (APS) channels in the current
APS group, use the channel local command in APS group configuration mode. To return to the default setting,
use the no form of this command.
channel {0| 1} local [preconfigure] sonet interface-path-id
no channel {0| 1} local [preconfigure] sonet interface-path-id
Syntax Description
{0 | 1}
preconfigure
sonet
interface-path-id
Command Default
A SONET APS local channel is not assigned.
Command Modes
APS group configuration
Command History
Release
Release 3.9.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
For the interface-path-id argument, use the following guidelines:
• If specifying a physical interface, the naming notation is rack/slot/module/port. The slash between values
Assigns a protect or working channel type. 0 is protect, 1 is working.
(Optional) Specifies a SONET preconfiguration. This keyword is used only when
a modular services or line card is not physically installed in a slot.
Specifies a SONET interface type.
Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
is required as part of the notation. An explanation of each component of the naming notation is as follows:
◦ rack: Chassis number of the rack.
◦ slot: Physical slot number of the line card.
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Use the show controllers sonet command to see a list of all controllers
currently configured on the router.
Modification
This command was introduced.
channel local
Release 5.3.x
849