Show Mlacp - Cisco ASR 9000 Series Command Reference Manual

Link Bundling Commands on the Cisco ASR 9000 Series Router

show mlacp

To display the MC-LAG information configured locally and for any connected mLACP peer devices, use the
show mlacp command in the EXEC mode.
show mlacp [Bundle-Ether interface-path-id| iccp-group group-id] [brief| verbose]
Syntax Description
Bundle-Ether interface-path-id
iccp-group group-id
brief
verbose
Command Default
No default behavior or values
Command Modes
Exec
Command History
Release
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
bundle
Examples
These examples display the MC-LAG information:
RP/0/RSP0/CPU0:router# show mlacp brief
ICCP Group 1
Connect timer:
Displays the information for the ICCP group of the bundle and only the
specified bundle.
Displays information related to the ICCP group.
Displays only the ICCP group information without any bundle
information.
Displays the ICCP group, the bundle and member information.
Off
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Modification
This command was introduced.
Operations
Read
show mlacp
Release 5.3.x
661