Cisco ASR 9000 Series Command Reference Manual page 726

show interfaces pos
Field
Admin Down
The following example shows how to display brief information for a specific POS interface:
RP/0/RSP0/CPU0:router# show interfaces pos 0/2/0/0 brief
-------------------------------------------------------------------------------
Table 48: show interfaces pos Field Descriptions
Field
Intf Name
Intf State
LineP State
Encap Type
MTU (byte)
BW (Kbps)
Related Commands
Command
show controllers pos, on page 900
show controllers sonet, on page 906
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
Release 5.3.x
706
Intf Intf
Name State
PO0/2/0/0 admin-down
Packet-over-SONET Interface Commands on the Cisco ASR 9000 Series Router
Description
Number of interfaces of the specified type that are in
the "Admin Down" state.
LineP
State
admin-down
Description
Interface identifier, in the type*rack/slot/module/port
notation.
Indicates whether the interface is in the admin-up or
admin down state.
Line protocol state.
Encapsulation type for the specified interface. Can
be HDLC or PPP.
Maximum transmission unit (MTU) value configured
for the specified interface, in bytes.
Bandwidth of the interface, in kbps.
Description
Displays information on the POS controllers.
Displays information about the operational status of SONET
layers.
Encap MTU BW
Type (byte) (Kbps)
HDLC 4474 2488320