Service Tool
List of Special Tools
When servicing this machine, the special tools shown below are required besides the standard tools.
Tool name
Digital multi-meter
CA-1 Test Sheet
Reference: Rank
A: Tool each service engineers should have 1 pc per engineer
B: Tool a group of approx. 5 engineers should have 1 pc per group
Solvents and Oils
Item
Alcohol
Molykote EM-50L
Tospearl 240 Grease
Molykote HP-300
FLOIL GE-676
FLOIL G-337
HANARL UD-321
■ Locations of Use for HANARL UD-321
Unit name
Right Door Unit
Right Door Unit
Tool No.
Rank
FY9-2002
A
FY9-9030
A
Uses
Cleaning; e.g.,
Lubrication; e.g., Bearing part of
the finisher
Drum Cleaning Blade Lubricant. FY9-6007
Bushings (L/R) of the pressure
roller
Conducting grease Contact
plate spring, Developing sleeve
electrode Mineral oil
Lubrication; e.g., scanner rail.
Parts name
Bushing
Bushing
Configuration
Parts No.
-
• Do not bring near fire.
• Procure locally.
• Substitute: IPA(isopropy alcohol)
HY9-0007
CK-8012
FY9-6023
FY9-6030
• SHC oil
FY9-6037
• Quick-drying grease(Since it is quick-
Parts num-
ber
FC0-5888
Shaft bush / Hole of Inner circumference.
Do not apply to feed side.
FC0-5876
Shaft bush / Hole of Inner circumference.
Do not apply to feed side.
933
Service Tool
Use/Remarks
Used for supplementary
electricity check of the
electricity check
For image adjustment/
check
Remarks
drying and transparent, caution is re-
quired to identify the area where it is
applied.)
Application position