Installing The Covers; Checking After Installation - Canon imageRUNNER ADVANCE C255 Series Service Manual

Installing the Covers

1.
< In the case of model with reader having Cassette
Pedestal >
NOTE:
If the Cassette Pedestal is not installed, skip the following
4 and 5.
2x

Checking after Installation

1. Connect the power plug of the host machine to the
power outlet.
2. Turn ON the main power switch.
3. If a message prompting the user to update the
version appears, press [Update] to automatically
update the version of the host machine.
NOTE:
If [Skip] is selected, a message prompting the user to
update the version will appear every time the host machine
is started. In the service mode shown below, it is possible
to set not to display the message prompting the user to
update the version.
• Service mode (Level 2) > COPIER > OPTION > FNC-
SW > VER-CHNG
4. Ask users to install license.
1x
1x
1x
5x
5. Turn OFF/ON the main power switch.
6. Press the counter check key on the control panel.
7. Press "Check Device Configuration" key.
8. Check that "Image Data Analyzer Board" is
displayed in option field.
868
9. Installation