Document Scan Lock Kit-B1
Points to Note at Installation
• To enable the function of "Image Data Analyzer Board",
it is necessary to install the license which comes with the
product.
• Request the user to install the Document Scan Lock Kit-
B1 which is a license option after installing the Image
Analysis Board.
• When installing at the same time with the Copy Card
Reader, be sure to install this equipment first.
• If the Copy Card Reader is installed, this equipment
cannot be installed unless it is removed. For the removal
procedure, refer to the chapter on "Installation" in the
Service Manual.
CAUTION:
An error occurs when the license is installed before
installing the Image Analysis Board, so make sure to
install the license after installing the Image Analysis
Board.
Installation Outline Drawing
Checking the Contents
TP; M3x6
3x
TP; M3x6
1x
Binding; M3x4
1x
Check Item When Turning OFF
the Main Power
Check that the main power is OFF.
1. Turn OFF the main power switch.
2. Check that the display in the Control Panel and the
lamp of the main power are turned off, and then
disconnect the power plug.
863
9. Installation
1x
3x
3x
1x
1x