Setting after Installation
1. Connect the power plug of the host machine to the
outlet.
2. Turn ON the main power switch.
3. Enter service mode (Level 1), and set the value to
"1".
• COPIER >FUNCTION > INSTALL > BLE-USE
NOTE:
When [System Manager Information Settings] is set, it is
required to log in as a system manager in accordance with
instructions of the user administrator.
4. Select [Settings/Registration] > [Preferences] >
[Network] > [Confirm Network Connection Setting
Changes], and set the item [ON].
5. Select [Settings/Registration] > [Preferences] >
[Network] > [Bluetooth Settings] > [Use Bluetooth] >
[ON].
6. The message "Perform Apply Setting Changes from
Settings/Registration" appears at the bottom of the
Touch Panel Display.
7. Press [Settings/Registration] > [Apply Setting
Changes] > [Yes].
931
9. Installation