2. Hook the claw [2] on the hole [B] of the Registration Patch Sensor Unit.
● Actions after assembly
Execute Auto Adjust Gradation and Auto Correct Color Mismatch.
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Adjust Gradation > Full Adjust
Settings/Registration > Adjustment/Maintenance > Adjust Image Quality > Auto Correct Color Mismatch
Removing the Secondary Transfer Outer Roller Unit
■ Procedure
NOTE:
If the duration level of the ITB Unit and that of the Secondary Transfer Outer Roller Unit are not equal, a color displacement may
occur in the output image.
CAUTION:
Be sure not to touch the surface [A] of the roller when disassembling/assembling.
1x
[B]
[2]
232
4. Parts Replacement and Cleaning
[A]