Relay Messages - GE MI-869 Instruction Manual

CHAPTER 3: INTERFACES
NOTE:

Relay Messages

Target Messages
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
Figure 3-9: Home Screen Icons
Table 3-1: Security Icon
Security State
User not logged in
User logged in
Table 3-2: Setpoint Group Icon
Description
Identifies the active setpoint group
Table 3-3: Wifi Icon
Wifi State
Disabled
Disconnected
Connecting
Connected
Table 3-4: File Saving Icon
Description
Indicates that a setting is being saved on the relay (i.e., when changing one of relay settings).
Icon is ON (relay is saving to flash memory)
Icon is OFF (relay is not saving to flash memory)
Do not remove power from the relay whenever the File saving icon is ON. When power is
removed the data being saved can also be lost.
Table 3-5: Active Target Icon
Description
When the target auto navigation setting is disabled, the message LED and the Active Target icon are
the only indication of active target messages.
Table 3-6: Breaker Health Icon
Description
The Breaker Health icon is blue when the setting for the breaker health function is not disabled.
When the setting is disabled the icon is grey.
Targets are messages displayed on the screen when any change of state of protection,
control, monitoring, or digital signal takes place. For the user's convenience, the targets for
major motor protection elements are set to Latched by default. The user can disable
targets for any particular element by selecting and entering the setting "Disabled" within
the element's menu.
FRONT CONTROL PANEL INTERFACE
Security Icon Color
Icon is green and locked
Icon is red and unlocked
Wifi Icon Color
Icon is grey and crossed by a red line
Grey
Orange
Green
3–9