Setpoints Entry Methods - GE MI-869 Instruction Manual

SETPOINTS MAIN MENU

Setpoints Entry Methods

4–2
Figure 4-1: Main Setpoints Display Hierarchy
Figure 4-2: Main Setpoints Screen
Before placing the relay in operation, setpoints defining system characteristics, inputs,
relay outputs, and protection settings must be entered, using one of the following
methods:
• Front panel, using the keypad and the display.
• Front USB port, connected to a portable computer running the EnerVista 8 Series
Setup software.
• Rear Ethernet (copper or fiber port connected to portable computer running the
EnerVista 8 Series Setup software.
• Wi-Fi wireless connection to a portable computer running the EnerVista 8 Series Setup
software.
• Rear RS485 port and a SCADA system running user-written software.
Any of these methods can be used to enter the same information. A computer, however,
makes entry much easier. Files can be stored and downloaded for fast, error free entry
when a computer is used. To facilitate this process, the GE EnerVista CD with the EnerVista
Device
System
Inputs
Outputs
Protection
Monitoring
Control
Flexlogic
Testing
869 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 4: SETPOINTS