Video Input Connector [1; Video Input Connector [4] Dvitype; Video Input Connector [5] Signaltype - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Video Input Connector [4] DviType

The official DVI standard supports both digital and analog signals. In most cases the default
AutoDetect setting can detect whether the signal is analog RGB or digital. However, in some
rare cases when DVI-I cables are used (these cables can carry both the analog and digital
signals) the auto detection fails. This setting makes it possible to override the AutoDetect
and select the correct DVI video input.
Requires user role: ADMIN
Default value: AutoDetect
Value space: AutoDetect/Digital/AnalogRGB/AnalogYPbPr
AutoDetect: Set to AutoDetect to automatically detect if the signal is analog RGB or
digital.
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with
both analog and digital pins and AutoDetect fails.
AnalogRGB: Set to AnalogRGB to force the DVI video input to AnalogRGB when using
DVI-I cables with both analog and digital pins and AutoDetect fails.
AnalogYPbPr: Set to AnalogYPbPr to force the DVI video input to AnalogYPbPr, as the
component (YPbPr) signal cannot be auto detected.

Video Input Connector [5] SignalType

Connector 5 can be used for either S-Video or Composite video input format. Use this
setting to configure which video format the BNC connector(s) are used for.
Requires user role: ADMIN
Default value: Composite
Value space: Composite/YC
Composite: Connector 5 is configured for composite video input. Only the BNC
connector that is labeled "Y" is used.
YC: Connector 5 is configured for S-Video input. Both BNC connectors ("Y" and "C")
are used.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals Maintenance
Video Input Connector [1..5] InputSourceType
Select which type of input source is connected to the video input.
Requires user role: ADMIN
Default value: Connector 1 and 2: camera Connector 3 and 4: PC Connector 5: other
Value space: camera/desktop/document_camera/mediaplayer/PC/whiteboard/other
camera: Use this when a camera is connected to the video input.
desktop: Use this when the video system's monitor is the main screen for the PC / laptop
that is connected to this input. The Video Input Connector [n] PresentationSelection
setting must then also be set to desktop.
document_camera: Use this when a document camera is connected to the video input.
mediaplayer: Use this when a media player is connected to the video input.
PC: Use this when a computer is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.
other: Use this when the other options do not match.
Video Input Connector [1..5] Name
Define a name for the video input connector.
Requires user role: ADMIN
Default value: ""
Value space: String (0, 50)
Name for the video input connector.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
152
Administrator Guide
System settings System settings Appendices