Cisco TelePresence SX80 Administrator's Manual page 24

Cisco TelePresence SX80

Introduction Introduction
How to administer the video system (page 4 of 4)
Settings available on the Touch controller
You have access to the following information and settings on the
Touch controller:
• System information, call status, and diagnostics (available to
all users)
• Restart of the video system (available to all users)
• Basic settings for sound, camera, main source, display,
language (may or may not be protected by passphrase, refer
to the UserInterface > UserPreferences
• Basic settings for pairing, provisioning, network, IP and call
protocols (always protected by passphrase)
Access Settings
1. Tap the settings icon (cogwheel) in the status bar of the Touch
controller.
2. Tap Settings.
3. Choose a category in the list .
*
You have to enter the Username and Passphrase of the video
system to open the Administrator settings.
*
Depending on product and product set-up, your Touch controller may or may
not display the same menus as shown in the illustration.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals
setting)
UserInterface >
Maintenance
Settings
Ringtone & Sound
Camera Control
Sign in to the video system's
Main Source Selection
web interface, and navigate
to Setup >
Display
Language
Use the
UserPreferences
System Information
to decide whether to keep
Call Status
these settings available
Diagnostics
for all users, or to move
Restart
them to the passphrase
protected area.
Administrator >
Available to all users
Administrator Settings
Date, Time & Location
Call Details
Provisioning
Pairing
IP & VLAN - Codec
Network Status - Codec
IP & VLAN - Touch
Network Status - Touch
SIP
H323
Security
EMC Resilience
Reset
Protected by passphrase
UserPreferences: On (default)
24
Administrator Guide
System settings
Settings
System Information
Call Status
Diagnostics
Configuration.
Restart
Administrator
UserInterface >
setting
Available to all users
Administrator Settings
Ringtone & Sound
Camera Control
Main Source Selection
Display
Language
Date, Time & Location
Call Details
Provisioning
Pairing
IP & VLAN - Codec
Network Status - Codec
IP & VLAN - Touch
Network Status - Touch
SIP
H323
Security
EMC Resilience
Reset
Protected by passphrase
UserInterface >
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Appendices
>
UserPreferences: Off