Cisco TelePresence SX80 Administrator's Manual page 179

Cisco TelePresence SX80

Introduction
Technical specification
MULTISITE FEATURES
(EMBEDDED MULTIPOINT)
• Five-way 720p30, three-way and four-way
1080p30 MultiSite
• Full individual audio and video transcoding
• Individual layouts in MultiSite continuous presence
• H.323/SIP/VoIP in the same conference
• Support for Presentation (H.239/BFCP) from any
participant at resolutions up to 1080p15
• Best Impression (automatic continuous presence
layouts)
• H.264, encryption and dual stream from any site
• IP downspeeding
• Dial in and dial out
• Conference rates up to 10 Mbps
PROTOCOLS
• H.323 and SIP (dual call stack support)
• ISDN (requires Cisco TelePresence ISDN Link)
EMBEDDED ENCRYPTION
• H.323 and SIP point-to-point
• Standards-based: H.235 v3 and Advanced
Encryption Standard (AES)
• Automatic key generation and exchange
• Supported in dual stream
IP NETWORK FEATURES
• DNS lookup for service configuration
• Differentiated services (QoS)
• IP adaptive bandwidth management (including flow
control)
• Auto gatekeeper discovery
• Dynamic playout and lip-sync buffering
• H.245 DTMF tones in H.323
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals
(page 2 of 3)
• RFC 4733 DTMF tones in SIP
• Date and time support via NTP
• Packet loss based downspeeding
• URI dialing
• TCP/IP
• DHCP (Dynamic Host Configuration Protocol)
• IEEE 802.1x network authentication
• IEEE 802.1q VLAN
• IEEE 802.1p QoS and class of service
• ClearPath
IPV6 NETWORK SUPPORT
• Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP,
HTTPS, DNS and DiffServ
• Support for static IP address assignment, stateless
autoconfiguration and DHCPv6
CISCO UNIFIED COMMUNICATIONS MANAGER
(requires Cisco UCM version 8.6 or later)
• Native registration with Cisco Unified
Communications Manager (CUCM)
• Basic CUCM provisioning
• Firmware upgrade from CUCM
• Cisco Discovery Protocol and DHCP option 150
support
• Basic telephony features such as hold, resume,
transfer, and corporate directory lookup
SECURITY FEATURES
• Management using HTTPS and SSH
• IP administration password
• Administration menu password
• Disable IP services
• Network settings protection
Maintenance
NETWORK INTERFACES
• One LAN/Ethernet (RJ-45) 10/100/1000 Mbps
• Two LAN/Ethernet (RJ-45) interfaces to be used for
Cisco TelePresence peripherals
OTHER INTERFACES
• Two USB host for future use
• GPIO
SYSTEM MANAGEMENT
• Support for the Cisco TelePresence Management
Suite (TMS)
• Management via embedded Telnet, SSH, XML, and
SOAP
• Full application programming interface (APIs)
• Remote software upload via web server, SCP,
HTTP, and HTTPS
• One RS-232 for local control and diagnostics
• Support for Cisco TelePresence Touch 10
DIRECTORY SERVICES
• Support for local directories (Favorites)
• Corporate directory (through CUCM and Cisco
TMS)
• Server directory supporting LDAP and H.350
(requires Cisco TMS)
• Call history with received, placed and missed calls
with date and time
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
179
Administrator Guide
System settings Appendices Appendices
POWER
• Autosensing power supply
• 100-240 VAC, 50/60 Hz
• Power consumption under normal operating
conditions as defined in IEC 60950-1: 99 W
OPERATING TEMPERATURE AND HUMIDITY:
• Ambient temperature: 32°F to 104°F
(0°C to 40°C)
• Relative humidity (RH): 10% to 90%
STORAGE AND TRANSPORT TEMPERATURE:
• –4°F to 140°F (–20°C to 60°C) at RH 10% to 90%
(non-condensing)
DIMENSIONS
• Width: 442 mm / 17.4 in.
• Height: 44 mm / 1.7 in.
• Depth: 310 mm / 12.2 in.
• Weight: 3.65 kg / 8.05 lbs