Cameras Presentertrack Connector; Cameras Presentertrack Enabled; Cameras Presentertrack Presenterdetectedstatus; Cameras Presentertrack Triggerzone - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Cameras PresenterTrack Connector

This setting applies only when using a Cisco TelePresence SX80 with Precision 60 camera
or SpeakerTrack 60 camera.
Define which video input connector the presenter tracking camera is connected to.
Requires user role: ADMIN, USER
Default value: 1
Value space: Integer (1..5)
The video input connector.

Cameras PresenterTrack Enabled

This setting applies only when using a Cisco TelePresence SX80 with Precision 60 camera
or SpeakerTrack 60 camera.
Define whether or not the PresenterTrack feature is available for use.
Requires user role: ADMIN, USER
Default value: False
Value space: False/True
False: The PresenterTrack feature is disabled.
True: The PresenterTrack feature is available for use.

Cameras PresenterTrack PresenterDetectedStatus

This setting applies only when using a Cisco TelePresence SX80 with Precision 60 camera
or SpeakerTrack 60 camera.
Define whether or not to update the Cameras PresenterTrack PresenterDetected status
when a new person enters the trigger zone.
The status is is used by the codec's internal scripts in the Briefing room scenario. This
setting may be used to turn off automatic layout switching in that scenario.
Requires user role: ADMIN, USER
Default value: Enabled
Value space: Disabled/Enabled
Disabled: The status is not updated when a new person enters the trigger zone.
Enabled: The status is updated when a new person enters the trigger zone.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals Maintenance

Cameras PresenterTrack TriggerZone

This setting applies only when using a Cisco TelePresence SX80 with Precision 60 camera
or SpeakerTrack 60 camera.
Define the image coordinates of the trigger zone on the video system screen. A person's
head must have been inside this region of the image in order to be tracked.
The format is a string of x and y coordinate pairs: "x1,y1,...xn,yn", where the range of x is
(0,1920) and y is (0,1080). Two coordinate pairs define the upper left and lower right corner
of a rectangular trigger zone. More than two coordinate pairs define the vertices of a
polygonal trigger zone.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0..255)
The coordinates for the trigger zone.

Cameras Preset TriggerAutofocus

The current position (pan and tilt), zoom and focus are stored with a preset. Use this setting
to determine if the camera should refocus or use the focus value that is stored with the
preset.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Off/On
Auto: Whether the camera refocuses or not when selecting a preset, depends on the
camera type.
Off: The focus value that is stored with the preset will be used. The camera will not
refocus when selecting a preset.
On: The camera will refocus when selecting a preset. The focus value that is stored with
the preset may be overridden.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
99
Administrator Guide
System settings System settings Appendices