How To Use Touch 10 - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction

How to use Touch 10

The Touch 10 user interface and its use are described in
full detail in the User guide for the video system.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals
Indicates wehther or not the
Proximity feature is available.
Tap the upper left corner to access
the System Information and Settings,
Restart the video system, and
activate /deactivate Standby, and the
Proximity and Do not disturb modes
Tap Dial to invoke
the dial pad.
Tap Contacts to invoke the list
of contacts including Favorites,
Directory and Recents.
Tap Meetings to invoke a list of
upcoming scheduled meetings.
Tap Messages to invoke the
voice mail system, if available.
Maintenance
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
123
Administrator Guide
System settings Appendices Appendices
Tap ? to contact Help desk, if available.
Tap the Camera icon to activate
self-view and camera control.
Tap Sign In
a shared video system
with your own personal
credentials, if available.
Press the
button to mute / unmute
microphones.
Press and hold the left side of the
Volume button to decrease the
loudspeaker volume and the right side to
increase the volume
Tap Share to start sharing content
and to conduct presentations.
Time of day.
to log on to
Microphone