Video Output Connector [1] Whitebalance Level; Video Output Connector [2] Rgbquantizatonrange; Video Presentation Defaultpipposition; Video Presentation Defaultsource - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction

Video Output Connector [2] RGBQuantizatonRange

Devices connected to an HDMI output should follow the rules for RGB video quantization
range defined in CEA-861. Unfortunately some devices do not follow the standard and this
configuration may be used to override the settings to get a perfect image with any display.
The default value is set to Full because most HDMI displays expects full quantization range.
Requires user role: ADMIN
Default value: Full
Value space: Auto/Full/Limited
Auto: RGB quantization range is automatically selected based on the RGB Quantization
Range bits (Q0, Q1) in the AVI infoframe. If no AVI infoframe is available, RGB quantization
range is selected based on video format according to CEA-861-E.
Full: Full quantization range. The R, G, B quantization range includes all code values (0 -
255). This is defined in CEA-861-E.
Limited: Limited Quantization Range. R, G, B quantization range that excludes some code
values at the extremes (16 - 235). This is defined in CEA-861-E.

Video Output Connector [1] Whitebalance Level

The LCD display's color temperature (white balance) is adjustable from 4000 K (warm) to
9000 K (cool). The default value is 6500 K.
Requires user role: USER
Default value: 6500
Value space: Integer (4000..9000)
Range: The value must be between 4000 and 9000.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals Maintenance

Video Presentation DefaultPIPPosition

Define the position on screen of the presentation picture-in-picture (PiP). The setting only
takes effect when the presentation is explicitly minimized to a PiP, for example using the
Touch controller. The setting takes effect from the next call onwards; if changed during a
call, it will have no effect on the current call.
Requires user role: ADMIN
Default value: Current
Value space: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/
LowerLeft/LowerRight
Current: The position of the presentation PiP will be kept unchanged when leaving a call.
UpperLeft: The presentation PiP will appear in the upper left corner of the screen.
UpperCenter: The presentation PiP will appear in the upper center position.
UpperRight: The presentation PiP will appear in the upper right corner of the screen.
CenterLeft: The presentation PiP will appear in the center left position.
CenterRight: The presentation PiP will appear in the center right position.
LowerLeft: The presentation PiP will appear in the lower left corner of the screen.
LowerRight: The presentation PiP will appear in the lower right corner of the screen.

Video Presentation DefaultSource

Define which video input source to use as a default presentation source. This setting may
be used by the API and 3rd party user interfaces, but is not relevant when using Touch 10
or the TRC6 remote control.
Requires user role: USER
Default value: 2
Value space: 2
The video input source to use as default presentation source.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
118
Administrator Guide
System settings System settings Appendices