Calling More Than One - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction
Place a call using the web interface
Sign in to the web interface and navigate to

Calling more than one

A point-to-point video call (a call involving two parties only) can
be expanded to include one more participant on audio-only.
If your system is using the optional built-in MultiSite feature, up
to four participants, yourself included, can join the video call
(conference).
Follow the same procedure to call the next conference participant
as you did when calling the first participant.
Calling more than one using a conference bridge (CUCM ad hoc
conferencing) is not supported from the web interface, even if it is
supported by the video system itself.
Adjust the volume
Mute the microphone
Click Microphone: On to mute the microphone.
Then the text changes to Microphone: Off.
Click Microphone: Off to unmute.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals
(page 2 of 2)
Call Control.
Volume down
Volume up
Maintenance
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
127
Administrator Guide
System settings Appendices Appendices