Capture User Interface Screenshots - Cisco TelePresence MX200 G2 Administrator's Manual

Cisco TelePresence MX200 G2 and MX300 G2

Introduction

Capture user interface screenshots

Sign in to the web interface and navigate to
User Interface Screenshots.
Capture a screenshot
Click Take screenshot of Touch Panel
capture a screenshot of the Touch controller,
or click Take screenshot of OSD to capture a
screenshot of the on-screen display.
The screenshot displays in the area below
the buttons. It may take up to 30 seconds
before the screenshot is ready.
All captured snapshots are included
in the list above the buttons. Click the
screenshot ID to display the image.
D15332.01 MX200 G2 and MX300 G2 Administrator Guide CE8.0, NOVEMBER 2015.
Configuration Peripherals
Diagnostics >
to
Maintenance Maintenance
Delete screenshots
If you want to delete all screenshots,
click Remove all.
To delete just one screenshot, click
×
the button for that screenshot.
www.cisco.com — Copyright © 2015 Cisco Systems, Inc. All rights reserved.
57
Administrator Guide
System settings Appendices
About user interface
screenshots
You can capture screenshots both of
a Touch controller that is connected to
the video system, and of the on-screen
display (menus, indicators and messages
on the main display).