Video Output Connector [1..2] Resolution; Video Output Connector [1] Whitebalance Level; Video Output Connector [2] Location Horizontaloffset; Video Output Connector [2] Location Verticaloffset - Cisco DX70 Administrator's Manual

Cisco DX70 and DX80

Introduction

Video Output Connector [2] Location HorizontalOffset

The HDMI output (Output Connector 2) is for future use.

Video Output Connector [2] Location VerticalOffset

The HDMI output (Output Connector 2) is for future use.

Video Output Connector [2] OverscanLevel

The HDMI output (Output Connector 2) is for future use.

Video Output Connector [1..2] Resolution

Connector 1: The resolution and refresh rate for the integrated display. This value is fixed
and cannot be changed.
Connector 2: The HDMI output (Output Connector 2) is for future use.
Default value: Connector 1: 1920_1080_60
Value space: Connector 1: 1920_1080_60
1920_1080_60: The resolution is 1920 x 1080, and the refresh rate is 60 Hz.

Video Output Connector [2] RGBQuantizationRange

The HDMI output (Output Connector 2) is for future use.

Video Output Connector [1] Whitebalance Level

The integrated display's color temperature (white balance) is adjustable from 4000 K (warm)
to 9000 K (cool).
Requires user role: ADMIN, USER
Default value: 6500
Value space: Integer (4000..9000)
The color temperature in Kelvin.
D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration Peripherals Maintenance

Video Presentation DefaultPIPPosition

Define the position on screen of the presentation picture-in-picture (PiP). The setting only
takes effect when the presentation is explicitly minimized to a PiP, for example using the
user interface. The setting takes effect from the next call onwards; if changed during a call,
it will have no effect on the current call.
Requires user role: ADMIN, INTEGRATOR
Default value: Current
Value space: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/
LowerLeft/LowerRight
Current: The position of the presentation PiP will be kept unchanged when leaving a call.
UpperLeft: The presentation PiP will appear in the upper left corner of the screen.
UpperCenter: The presentation PiP will appear in the upper center position.
UpperRight: The presentation PiP will appear in the upper right corner of the screen.
CenterLeft: The presentation PiP will appear in the center left position.
CenterRight: The presentation PiP will appear in the center right position.
LowerLeft: The presentation PiP will appear in the lower left corner of the screen.
LowerRight: The presentation PiP will appear in the lower right corner of the screen.

Video Presentation DefaultSource

Define which video input source to use as a default presentation source. This setting may
be used by the API and 3rd party user interfaces. It is not relevant when using the user
interfaces provided by Cisco.
Requires user role: ADMIN, USER
Default value: 2
Value space: 2
The video input source to use as default presentation source.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
127
Administrator Guide
System settings System settings Appendices