Table of Contents
Advertisement
Honeywell
HWLKS-C-M-1918
Program and Operation
6. PASSWORD ( MENU => PASSWROD)
1.
Change password : Move the joystick handle right and up or down to select number
0~9(a number of four figures), and do same way to confirm.
2.
Save and exit with joystick handle to right ( Or ESC to exit without saving)
7. COMMUNICATION ( MENU => COMMUNICATION)
1.
Move the joystick handle right. You can select CAMERA ID to select the joystick up or down.
2.
Move the joystick handle right. You can select BARDRATE (2400/ 4800/ 9600/ 19200/
38400/ 57600/ 115K/ 230K) to select the joystick up or down.
3.
Move the joystick handle right. You can select protocol by the joystick up or down.
4.
Save and exit with joystick handle to right ( Or ESC to exit without saving)
5.
You should use the remote controller which was included to the product to change its
protocol for communicating.
PASSWORD SETUP
MENU PASSWORD : ON/OFF
CHANGE PASSWORD : ****
CONFIRM
: ****
SAVE AND EXIT
COMMUNICATION SETUP
EXPTZ ID : 0001
BAUDRATE : 9600
PROTOCAL : AUTO
SAVE AND EXIT
- 33 -
Advertisement
Table of Contents
