Honeywell EXPTZ-252A Installation&Operation Manual Book page 14

Honeywell
HWLKS-C-M-1918
Program and Operation
Locate the cursor on the FUNCTION item and then push the joystick to the right to enter
FUNCTION menu.
1.1 HOME FUNCTION ( MENU =>FUNCTION => HOME FUNCTION)
After HOME FUNCTION item has been selected, follow the directions below to set
HOME function.
FUNCTION
NUMBER
TIME
OPERATION
The HOME function invokes predefined functions such as Preset, Tour, Pattern, or Scan function after
the keyboard controller has been idle for a programmed time.
Follow the steps below to program the Home function:
1.Select the camera number by pressing No. and CAM
2.Press MENU to display the main menu on the monitor.
3.Push the Joystick to the right on "FUNCTION".
4.Enter Home Function menu by pushing the Joystick to the right.
5.Push the Joystick to the right/ left (or twist CCW/CW) to scroll Tour, Auto Scan and Preset
functions.
6.Select Function Number by pushing the Joystick down, and twist the Joystick to the
CCW/CW (or push right/left). The executable function number will be scrolled. If selected
function is not programmed, it won't change. Go to setup function first.
FUNCTION
HOME FUNCTION
PRESET
SCAN
TOUR
EXIT MENU
HOME FUNCTION
FUNCTION : TOUR
NUMBER : ---
TIME : 060 SEC
OPERATION : DISABLE
SAVE AND EXIT
: Tour/ Preset/ AutoScan
: - - -
: 10~240 Seconds
: ENABLE/ DISABLE
- 14 -