Table of Contents
Advertisement
Honeywell
HWLKS-C-M-1918
Program and Operation
1.
Press MENU => SCREEN => ZONE TITLE to display zone title menu on the monitor.
2.
Select the zone number by pushing the Joystick up or down. Select Start, End or number
column to be set by pushing the handle to the right or left. The selected column will be
highlighted.
3.
Twist the joystick handle on the No. column to enter zone title. You can select alphanumeric
characters by rotating the handle. Move to the next character by pushing the Joystick to the
right. To finish entering the title, push the Joystick down.
4.
To adjust panning limit, press the SHFT/PGM key and hold down. Then use the Joystick to go
the desired direction. The end limit must be in an increasing direction. (Start < End). (Or twist
zoom handle or hit zoom button to start PTZ control for view selection and hit the Focus button
to exit from control mode.)
5.
PREV NEXT : got to previous page or next page of the menu
6.
Save and exit the program by pushing the Joystick to the right. Press ESC to exit the program
without saving.
7.
Press the HOME or OFF button to delete programmed data.
3.5 CAMERA TITLE ( MENU => SCREEN => CAMERA TITLE )
Push the joystick handle to the right to select CAMERA TITLE options
1.
Move the joystick handle right. You can select alphanumeric characters by rotating the handle.
Move to the next character by pushing the Joystick to the right. Camera title is limited to 8
characters (A~Z, 0~9).
2.
To finish entering the title, push the Joystick down.
3.
Save and exit with joystick handle to right ( Or ESC to exit without saving)
SCREEN MENU
LANGUAGE
PRIVACY ZONE
NORTH DIRECTION :000.0
ZONE TITLE
CAMERA TITLE : EXPTZ
OSD DISPLAY
SAVE AND EXIT
- 25 -
Advertisement
Table of Contents
