Table of Contents
Advertisement
Honeywell
HWLKS-C-M-1918
Program and Operation
8. Push the Joystick downward to select "SWAP" and set the swap by moving the Joystick
left and right to select the swap ON or OFF.
9. Select Save and Exit by pushing the Joystick to the right. Press ESC to exit the program
without saving.
10. Press the HOME or OFF button to delete programmed data
NOTE: Press 17 + SCAN to automatically calls up the auto-pan function.
1.4 TOUR (or MENU => FUNCTION => TOUR, Short Cut: TOUR)
There are 8 programmable Tours. Each Tour consists of up to 64 Preset positions,
Scans or other Tours. Using second-level Tours, it can be expanded to over 56 functions in a
single Tour. However tours second level Tours will be ignored when called by a Tours. This
can be best illustrated by the following example:
If
Tour 01 : Preset 02, Preset 03,Tour 02, Tour 03
Tour 02 : Preset 05, Preset 06,
Tour 03 : Preset 07,
Tour 04 : Preset 08. Preset 05,
Tour01 executes as follows:
Preset 02 Preset 03 Preset 05 Preset 06 Preset 05 Preset 07 ...
(Repeat) ---Tour 04 in Tour 02 will be skipped in Tour 01
Tour02 executes as follows:
Preset 05 Preset 06 Preset 08 Preset 05 ...(Repeat) (Tour4 is still valid if
called directly from Tour2.)
TOUR 01:xxxxxxxxxxxx
FUNC NO
PRST 001 S 99 ----------------
SCAN 016 S 99 ----------------
TOUR 008 S 99 ----------------
---- --- - -- ----------------
---- --- - -- ----------------
---- --- - -- ----------------
---- --- - -- ----------------
PREV
SAVE AND EXIT
01/04
S DW TITLE
NEXT
Tour
04, Preset 05
xxxxx
- - -
Speed
. Scan/ Medium V. Scan
DWell
PRST
SCAN
TOUR
- 18 -
: 16 digits of title for tour label
: blank preset position
: Fast (Normal)/ Slow V
: 01-99 Sec
: Preset 1~128
: SCAN 1~8
: TOUR 2~4
Advertisement
Table of Contents
