Table of Contents
Advertisement
Honeywell
HWLKS-C-M-1918
Program and Operation
5.5 FACTORY DEFAULT (MENU => SETUP => FACTORY DEFAULT)
YES : ENTER OR MENU KEY
NO : ESC KEY
Programmed data go back to initial state as ex-factory
5.6 ERASE DATA (MENU => SETUP => ERASE DATA )
YES : ENTER OR MENU KEY
NO : ESC KEY
Erase programmed data in the EEPROM of the selected dome camera. Press MENU or ENTER
button to erase data, ESC key to exit without erasing. Origin offset value is not affected.
CAUTION: Unless you download the data into a safe place, all the data in the selected EXPTZ
camera will be lost. (Refer to Download/ Upload data function in the Keyboard Configuration
utility)
5.9 SYSTEM INFORMATION (MENU => SETUP => SYSTEM INFORMAION)
This screen shows information of the EXPTZ camera for service or trouble shooting
FACTORY DEFAULT
ARE YOU SURE ?
YES
NO
ERASE PROGRAMMED DATA
ARE YOU SURE ?
YES
NO
SYSTEM INFORMATION
CAMERA TYPE
: XXXXXXX
H/W VERSION
: REV1.1
ROM VERSION
: V0.16
PROTOCOL
: S2E
BUADRATE
: 9600BPS
EXIT MENU
- 32 -
Advertisement
Table of Contents
