Table of Contents
Advertisement
Honeywell
HWLKS-C-M-1918
Program and Operation
Follow the steps below to program the Preset positions.
1.
Select the camera number by pressing 0 ~9 and CAM.
2.
Simply press PRST button to enter preset menu. ( MENU => FUNCTION => PRESET)
3.
Select the empty preset location to be programmed using the Joystick up/down. If selected
location is not empty, pressing PRST button will show your predefined position.
4.
After selecting an empty position, press and hold SHFT/PGM then use the Joystick to control
the direction of the camera and lens.(Or twist zoom handle or hit zoom button to start PTZ
control for view selection.)
5.
After aiming the camera (view direction and lens control) at specific position, release
SHFT/PGM button (or hit the focus button). The selected location No. field will be filled with "A
A F". Push the joystick to the right to select each Focus/ Iris /BLC mode using zoom handle.
6.
Move the cursor to the title field to edit/enter the title. Rotate the handle CW and CCW to scroll
through the alphanumeric characters. Push the handle to right or left to select next or previous
digit.
7.
To finish entering the title, push the Joystick up/downward.
8.
Locate the cursor on "PREV NEXT" item to select the previous/next page of presets, scroll the
page by pushing the Joystick to the Left on "PREV NEXT".
9.
Repeat steps 2 through 8 for each additional preset position.
10.
Select Save and Exit by pushing the Joystick to the right. Press ESC to exit the Preset menu
without saving
11.
Press the HOME or OFF button to delete programmed data.
NOTE: Press the Home or OFF button at programmed position to delete a programmed preset
view.
Shortcut of Preset Program.
Select direction of the camera, zoom and focus to be programmed, then press No. (1~128), and then
press SHFT, PRST subsequently. The current view will be stored to the selected preset number
if position is empty. If selected preset number is not empty, "PRESET EXISTING" message will
be displayed on the monitor and you will be prompted to overwrite.
Example: 1, 0 + PGM + PRST will memorize current view as preset No. 10. In this case, focus and
Iris mode will be memorized as auto and dwell time will be set to 3 sec.
- 16 -
Advertisement
Table of Contents
