Table of Contents
Advertisement
Honeywell
HWLKS-C-M-1918
Program and Operation
1.
Select the Privacy Zone option by pushing Joystick Up or Down and push to right to enter
the detail menu.
2.
Select the privacy zone number by pushing the Joystick up or down.
3.
To enter the zone name, rotate the handle clockwise or counterclockwise. You can select
alphanumeric characters by rotating the handle. Move to the next character position by
pushing the Joystick to the right. To finish entering the title, push the Joystick down or
press the ENTER key.
4.
To adjust the "marked" (privacy) area, press and hold down the SHFT/PGM key and then
use the Joystick (direction and zoom) until you get desired view. Release the key, the right
column will be set to ON. (Or twist zoom handle or hit zoom button to start PTZ control for
view selection and hit the Focus button to exit from control mode.)
5.
You can overwrite an existing zone. Use the Home key to delete the marked zone, or push
the Joystick to the right or left to turn the stored zone On or Off.
6.
Select the mask color by pushing the Joystick left or right
7.
Select the Save and Exit option by pushing the Joystick up or down. Save and exit the
program by pushing the Joystick to the right. Press ESC to exit the program without saving.
Press the HOME or OFF button to delete programmed privacy zone.
- 23 -
Advertisement
Table of Contents
