Honeywell IQ8Control C Installation Instruction page 22

Fire Alarm Control Panel IQ8Control C/M
Housing contact
The housing contact provides the monitoring of the panels housing and may be used additionally for control
function by means of service or maintenance work, e.g. to disconnect devices whilst the contact is open.
1
1
Housing
open
V2
8 1
7 2
6 3
5 4
X7 X8
Fig. 16: Housing contact
22
Max. 2 contacts per housing
•
(1 integrated contact by factory configuration)
1
Max. 4 contacts per FACP
•
Select contact operation via the panels data
•
configuration, e.g.
- Disconnect master box whilst open contact
- Access of Service-PC whilst open contact
- und additional features
1
The housing contact must be place to the appropriate
insert on the top corner of the housing.
Housing contact / contact tab points downwards
•
Connect to Basic module
(refer to section "Basic module")
FB 798951.GB0 / 01.09