Honeywell IQ8Control C Installation Instruction page 131

Fire alarm control panel
Hide thumbs Also See for IQ8Control C:
Table of Contents

Advertisement

®
14
esserbus
®
esserbus
transponders are input/output modules for extending the control panel inputs/outputs. As devices on
the analog loop - the esserbus
®
the esserbus
.
It is possible to install up to 32 esserbus
isolators). Mixing the operation of fire detectors and esserbus
detector zone.
®
The esserbus
transponders is installed either at special fitting locations or on a standard C-mounting rail in the
Fire Alarm Control Panel, or at decentralised level at any location in a special plastic housing (Part No. 788600 /
788601). The internal voltage supply is fed to the esserbus
loop.
For additional information refer to the technical manual of the esserbus
Type
eK-12REL
eK-32AE
eK-1Grp
eK-4Grp/2Rel
eK-KOM-LMST
eK-FSA
Third party module
®
For esserbus
PLus loops with a loop voltage of 42 V it is required to connect the appropriate
transponders or devices with the Part No. 80xxx x (refer to Chapter 5.1.2).
FB 798951.GB0 / 01.09
transponder
®
- they may be operated jointly in separate detector zones with fire detectors on
®
transponders in separate detector zones (separated by zone
Description
with 12 relay outputs
with 32 outputs to drive LED
with one detector zone input
with 4 detector zone inputs and 2 relay outputs
To be operated as standard interface (SST) to control
extinguishing systems
communications transponder for a 8010 fire alarm and
extinguishing computer.
This communications transponder is installed inside the
housing and immediately on the processor board of the 8010
fire alarm and extinguishing computer.
The FSA-transponder for a stand-alone fire door control or as a
loop device connected fire alarm system 8000.
Third party module RZT 8000 for an individual connection of
automatic and non-automatic fire alarm detectors supplied by
other manufacturers
Fire Alarm Control Panel IQ8Control C/M
®
transponders is not permissible within one
®
transponder from the zone voltage of the analog
®
transponder.
Part No.
808610.10
808611.10
808614.10
808613.20
808613.30
808615
808619.10
80863X.10
131

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq8control m

Table of Contents