Table 11 -Information Menus - Honeywell STT850 SMARTLINE User Manual

<Return>
Year
S1 Install
Month
Date
Day
Write Date
<Return>
Year
S2 Install
Date
Month
Day
Write Date
<Return> Return to the Level 1 menu
<Return>
Display
Firmware Version
<Return>
Firmware Version
HART/DE Version
Comm Module
Protocol
<Return>
Firmware Version
Model Key
Sensor Module
Units
Revision 1
Enter the current year.
# # # # This item will only be visible if no Install
Date has been written to the transmitter.
Select the current month.
January thru
This item will only be visible if no Install
December
Date has been written to the transmitter.
Enter the day of the month.
# # This item will only be visible if no Install
Date has been written to the transmitter.
Press ENTER to write the Install Date to the transmitter.
Enter the current year.
# # # # This item will only be visible if no Install
Date has been written to the transmitter.
Select the current month.
January thru
This item will only be visible if no Install
December
Date has been written to the transmitter.
Enter the day of the month.
# # This item will only be visible if no Install
Date has been written to the transmitter.
Press ENTER to write the Install Date to the transmitter.
Information Menus
Table 11 –
The firmware version of the Display Module
The firmware version of the Electronics Module
The firmware version number of the Electronics
Module as displayed via the HART and DE
protocols
The communications protocol of the transmitter:
•
HART: HART protocol
•
DE: Honeywell DE protocol
•
FF: Foundation Fieldbus
The firmware version of the Sensor Module
Identifies the type and range of the transmitter
The Engineering Units for the LRL and URL.
Note that you can change these Units from the
Transmitter Setup menu, if desired (Transmtr
STT850 Temperature Transmitter User's Manual
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Read
Only
Page 33