Diagnostic Program - Casio DT-940 Service Manual

4. DIAGNOSTIC PROGRAM

Diagnostic program exists in
As for Bluetooth, please refer to 4.8 Bluetooth diagnostic method.
The document is processed based on Version 2.98.
Be sure to update the firmware after replacing the Laser Module (MDL-1001) of DT-940 with a new one.
For more information about DT-940 laser test, refer to "4.10 DT-940 LASER SCANNER CHECK".
4-1. UPDATING DT-940 FIRMWARE
4.1.1 NECESSARY FILES
In order to execute the firmware version up for LASER MODULE, all the below files have to be transferred
to DT-940 Flash ROM (B drive).
It is done by using LMWIN or "DUPLICATE HT" in the System menu.
These files are contained in the "Dt930\Dt940_Laser_Firm" folder.
No Program name
1 ASTARH.HTS
2 FL56J06.txt
3 mdlver.txt
4 PATCH001.LOD
5 PATCH002.LOD
6 WRITEFW.LOD
Note: After updating the firmware, format the "B" drive and delete the above programs.
4.1.2 OPERATING PROCEDURE
NO. Display
F/W Update Tool
MAIN: FL56J06
FILE: FL56J06
1
Update: 1
Cancel: 3
F/W Update Tool
MAIN: FL56J06
Complete!
2
Hit any key
システムメニュー
1 : AP キドウ
2 : モードセット
3
3 : ヒヅケ / ジコク セット
4 : テンソウ
5 : バージョン
64 Kbyte and exclusive use area among FROM and mixable with OS and KCG.
Rewriting tool boot-up file
Firmware
Updating data file
Patch file
Patch file
F/W Update Tool
Operation
Execute AP starting up from
System Menu and start up F/W
Update Tool.
Input [1] to start.
When "Complete!" appers, input
any key.
Firmware version up for LASER
MODULE completed.
― 23 ―
Contents
Remarks/Result
F/W Update Tool
MAIN: FL56J06
FILE: FL56J06
Writing . . .
Screen shown during update
09%