Casio DT-940 Service Manual page 18

3.3.5 SUB-ASSY DISASSEMBLY/ASSEMBLY
Procedures
(1) Remove two C screws (+, silver).
(2) Hold up SUB-ASSY and disconnect FFC-CABLE from the connector (single point).
(3) Detach SUB-ASSY.
* For the assembly, reverse the above order.
(1) C Screws
3.3.6 BUZZER DISASSEMBLY/ASSEMBLY
Procedures
(1) Remove two C screws (+, silver).
(2) Hold up BUZZER-ASSY and remove the connector (single point).
(3) Detach BUZZER-ASSY.
* For the assembly, reverse the above order.
Battery Side
(2)
(1) C Screw
― 16 ―
(2) Disconnect FFC-CABLE from the con-
nector (indicated in a circle) positioned
under SUB-ASSY after releasing the
lock upward.
Connector Side
(3) BUZZER-ASSY
CUSHION-CN-S
FFC-SUB-PY050